LD Systems MAUI 44 G2 SUB - Powered 15" Subwoofer for MAUI 44 G2

LD Systems MAUI 44 G2 SUB - Powered 15"  Subwoofer for MAUI 44 G2
Pret la cerere
La comanda
LD Systems
cod produs: LDMAUI44G2SUB
Descrierea Produsului

Crisper and more powerful bass with additional LDMAUI44G2SUB subwoofer.

With the MAUI 44 G2 SUB subwoofer, you can extend the cardioid characteristics of our professional column loudspeaker series into the bass range.

Well, what does that mean?

Simply position the SUB next to your MAUI® 44 G2 (W) facing the rear direction, press the cardioid button and you will have a quieter and controlled Low-End on the back while still keeping the punch on the front. Low-End frequencies on the back of the system will be dampened by -15 dB. For extra Bass, keep the SUB in the same direction as your MAUI® 44 G2 (W) without pressing the cardioid button.

Setting up the SUB with your MAUI® 44 G2 (W) is straight forward and fast. Thanks to its automatic set-up detection system the SUB immediately switches to FOLLOWER mode as long as no column is attached.

Also recommendable is the protection cover and castor board to make transportation easy and keep the SUB as long as possible free of any touring-damage.

The MAUI® 44 G2 SUB features the same design construction as the MAUI® 44 G2 (W) subwoofer and will be the perfect addition to get your Low-End in control.

  • Powered 15" subwoofer with flow-optimised bass-reflex ports
  • 15" custom-designed woofer with deep bass down to 37 Hz
  • Preset-Switch for cardioid subwoofer configuration
  • DynX® DSP technology for distortion-free sound at maximum volume
  • Automatic set-up detection
  • Rugged subwoofer housing made out of polyurea-coated birch plywood
  • Shockproof front grille for ultimate speaker protection
  • Two ergonomic handles covered in rubber for easy handling
  • Attachment points for our MAUI® 44 G2 CB castor board
Product typePA Complete Systems Accessories
TypePowered
Low/mid Woofer dimensions15 "
Woofer dimensions (mm)381 mm
Woofer magnetNeodymium
Woofer brandCustom-made
Woofer voice coil4 "
Woofer voice coil (mm)101 mm
AmplifierClass D
System Power (RMS)800 W
Peak power1600 W
Max. SPL (Peak)126 dB
Protection circuitsConvection
Protection circuitsDC
Protection circuitslimiter
Protection circuitsshort circuit
Protection circuitsthermal overload
ControlsBluetooth HOLD TO LINK button
ControlsBluetooth STEREO LINK button
ControlsCardioid On/Off
ControlsMain level
ControlsPower On/Off
ControlsSub level
IndicatorsBluetooth
IndicatorsBluetooth STEREO LINK
IndicatorsCardioid On/Off
IndicatorsFollower mode
IndicatorsLimit
IndicatorsPower
IndicatorsProtect (protection circuit engaged)
IndicatorsSignal
Line inputs2
Line input connectors2 x XLR
Line outputs2
Line output connectors2 x XLR
Loudspeaker outputs1
Speaker output connectionsCustom-made multipin
Operating voltageSwitching power supply
Operating voltage100 - 120 V / 50 - 60 Hz or 200 - 240 V / 50 - 60 Hz (automatic switching)
Operating Temperature0 - 40 °C
Relative Humidity< 80% (non-condensing)
Cabinet material18 mm Birch Plywood
Cabinet surfacePolyurea
Cabinet constructionBass Reflex
Bluetooth StandardA2DP
Bluetooth Audio DecoderAAC
Bluetooth Audio DecoderaptX
Bluetooth Audio DecoderSBC
Width434 mm
Height634 mm
Depth637 mm
Weight36,4 kg

DSP characteristics

Bit depth AD/DA converter24 bit
Sampling frequency48 kHz
Signal-to-noise ratio106 dB
Review-uri
Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.