LD Systems DDQ SUB 212 - 2 x 12" active PA Subwoofer with DSP

LD Systems DDQ SUB 212 - 2 x 12" active PA Subwoofer with DSP
10049.11 Lei
7034.38 Lei
*pretul include TVA
In Stoc
LD Systems
cod produs: LDDDQSUB212
Descrierea Produsului

The LD Systems DDQ Sub 212 is a powerful active subwoofer with two specially developed 12" bass speakers and digital signal processing, specially conceived for use in combination with the full-range speakers of the DDQ Series. It ensures deep bass reproduction in PA systems and can also be matched to the satellites/tops of other manufacturers.

The two woofers with 3" coils and neodymium magnets are driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply and a RMS output of 1400 watts. The DDQ Sub 212 attains a maximum sound-level pressure of 132 dB over a frequency response curve of 38 – 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers has a large dynamic range of 127dB/113 dB (ADC/DAC) and handles frequency and phase correction in addition to providing extensive protection functions for reliable operation. Its 1ms look ahead limiter provides for distortion-free reproduction even at maximum volume levels. Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. The inputs and outputs as well as the separate mono output with a 100Hz high-pass filter use Neutrik XLR sockets. Additional features are LED function indicators and a ground lift switch; the volume and preset encoders can be deactivated to prevent inadvertent adjustment.

The compact band-pass enclosure of the DDQ Sub 212 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is prepared for mounting of casters and features comfortable handles and two M20 threaded flanges.

Product typePA subwoofer
DesignDSP controlled
Low/mid driver dimensions2 x 12 "
Woofer size2 x 304.8 mm mm
Woofer magnetNeodymium
Woofer brandCustom-made
Woofer voice coil3 "
Woofer voice coil (mm)76.5 mm
AmplifierClass D
RMS1400 (2 x 700) W
Frequency response38 - 120 Hz
Max. SPL (continuous)124 dB
Max. SPL (peak)132 dB
Protection circuitsDSP-based "look ahead" limiter, over-current, RMS power supply limiter, RMS speaker limiter, short circuit
ControlsDSP presets, DSP/ Gain enable, Gain, ground lift, Power
IndicatorsDSP/ Gain disable, Operate, Peak Limit, Signal
Line inputs2
Line input connectorsXLR
Line outputs3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectorsXLR
Operating voltageSwitching power supply, 180 - 264 V ~ / 47 - 63 Hz
Cabinet material18 mm Plywood
Cabinet surfacePolyurea
Cabinet constructionBandpass
Width420 mm
Height620 mm
Depth543 mm
Weight34,5 kg
Features15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), 2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters
Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.