EUROLITE LED Strobe SMD PRO 132 DMX RGB

The LED Strobe SMD PRO 132 DMX RGB combines three functions in one fixture: It is equipped with 132 bright RGB SMD LEDs for both dynamic strobe effects and slower blinder effects. Depending on the selected DMX mode, you can choose from up to 15 preset colors for wash effects. The built-in SMD LEDs are flicker-free and therefore the effect can also be used in a TV studio.

The fixture has an auto, music, master/slave and DMX mode and incorporates 3-pin DMX connectors as well as an IEC input to connect it to the mains. The flash frequency and duration is variably adjustable. For a structured and versatile use, you can choose from 7 different DMX modes with 1, 2x2, 3x3, 4, or 6 DMX channels respectively.

Multifunctional strobe/flood/blinder with 132 bright SMD RGB LEDs

• 3 effects in one device: strobe, blinder and wash light
• 132 SMD RGB LEDs, 0.2 W each
• Auto, music, master/slave and DMX mode
• Built-in auto and music show program
• Direct color selection for 15 preset colors
• Brightness, flash-rate (1-30 flashes/sec) and flash duration adjustable
• Special effects
• Random strobe effect
• Stepless RGB color mixing and color change
• Dimmer
• Addressing and setting via control panel with 4-digit LED display
• Sound-control via built-in microphone with adjustable microphone sensitivity
• DMX512 control possible via any commercial DMX controller
• 1, 2x2, 3x3, 4, or 6 DMX channels selectable
• Swivel mounting bracket
• Ready for connection via power cord with safety plug
• Effect: Strobe effect
• Projection: flickerfree
• fehlt: Mains Input Socket (M) fehlt (provided)
• Control: Stand-alone; DMX
• LED: 132 x SMD 5050 3in1 TCL RGB (homogenous color mix)