Comenzi telefonice: +40.755.631.576
Deschis astazi 10:00 - 18:00

LIM012 - Balanced Stereo Limiter

cod produs: LIM012
La comanda
1082.52 Lei
*pretul include TVA

Descrierea Produsului

The LIM012 balanced stereo limiter is a small size, easy to use, device that can be used for limiting the signal coming from an input device such as a mix-table, microphone, etc… that is then send to a (power)amplifier. Limiting this input signal will not only protect your PA system, but also enables you to comply to restrictions by law.

When the input signal of this input device exceeds the desired level, the LIM012 will then attenuate the output signal sent to the output device in such a way that it will again reach the desired level. This level can be set by turning the Limit switch and can be limited at 6 different levels: 0 dBV, -6 dBV, -12 dBV, -18 dBV, -24 dBV and -30 dBV. At the bottom the green LED’s indicate the set Limit level. When the output signal is exceeding the desired Level, attenuation will take place and the red LED will indicate the location of the Limitation (Left or Right).

The LIM012 balanced Stereo Limiter has 2 channels that can work separately whereby it can be used as a stereo, or 2 x mono limiter.

The LIM012 needs to be connected to a 24 DC power source. The PSD242 Power supply is included.


  • Stereo or 2 x Mono operation
  • Balanced in- and outputs
  • 6 different limit levels
  • 0 dB to -30 dB Level range
Level Range 0 dBV to -30 dBV
Frequency Response 20Hz - 20kHz
Power Supply 24V DC - PSD242(incl.)
Signal / Noise > 90 dB
THD + N < 0,15%
Dimensions (W x H x D) 110 x 44 x 160 mm

Specificatiile Produsului

  • Tip procesoare Procesoare diverse


Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.
Scrie-ti parerea

Nu exista nici un produs vizualizat recent.


Nu exista nici un produs adaugat in lista de comparatie.