The LD DPA 260 is a 6-channel 19” speaker processor for our VA4 and VA8.
Product type | Signal Processors |
Type | 6-channel |
Version | 6-channel |
AD/DA converter | 24 bit |
Sampling frequency | 48 kHz |
Frequency response | 20 - 20.000 Hz |
Filter type | Bessel, Butterworth, Linkwitz-Riley |
Delay | max. 848.99 mS |
Filter slew rate | 12 dB/oct, 18 dB/oct, 24 dB/oct, 6 dB/oct |
Dynamic range | 111 (A-weighted) dB |
Signal-to-noise ratio | > 106 dB |
Total Harmonic Distortion (THD) | < 0.005 % |
Crosstalk | 107 (+ 20 dBu @ 1 kHz) dB |
Max. input level | +20 dBu (balanced) dBu |
Max. output level | +20 dBu (balanced) dBu |
Input impedance (kOhms) | 27 kOhm |
Output impedance | 120 Ohm(s) |
Controls | Edit Input 1 - 2, Edit Output 1 - 6, Enter, Escape, NAV / PAR 1, PAR 2, PAR 3, Utility |
Indicators | 2 x 6-segment input level display, 2 x input clip, 2 x input edit LED, 2 x input mute LED, 6 x 5-segment output level display, 6 x output clip, 6 x output edit LED, 6 x output limit, 6 x output mute LED, multifunction LC display |
Line inputs | 3 |
Line input connectors | 1 x stereo digital (SPDIF coax), 2 x XLR (bal.) |
Line outputs | 6 |
Line output connectors | XLR (balanced) |
Interfaces | RS485 (in & out), USB |
Mains connector | IEC socket |
Operating voltage | 90 V AC - 250 V AC, 50 - 60 Hz |
Width | 482 mm |
Height | 44.5 mm |
Depth | 225 mm |
Weight | 3,5 kg |