Comenzi telefonice: +40.755.631.576
Deschis astazi 10:00 - 18:00

WMI20/W - Wall Mic Input - Bticino - Rj45 - White

Audac
cod produs: WMI20/W
La comanda
496.22 Lei
*pretul include TVA
Cumpara
+-

Descrierea Produsului

The WMI20 is a Wall Microphone Input unit which can be used in combination with AUDAC MTX series Multi-Zone audio matrix systems, the RM523 & AMP523 web-based input control units and the APG20 receiver gateway. It provides the possibility for transferring an audio signal from a Microphone level audio source over a large distance by using standard CAT5e UTP (or better) cable. The connection should be made using an RJ45 connector on the back side of the unit. The depth of the RJ45 connector will not allow the WMI20 to be installed in surface mount boxes. A jumper on the rear side of the panel allows you to enable the 12V phantom power for powering condenser microphones and the audio transfer is done in a differential way with increased voltage levels, making the transferred signal insensitive for interference and noice generated by external devices. This allows bridging distances up to 500 meter between the input unit and the receiver end. The WMI20 is the bTicino version of the WMI units, which can only be used in combination with bTicino installation materials. Available in Black (/B) and White (/W). 

Specificatiile Produsului

  • Echipamente Sunet Accesorii sunet

Review-uri

Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.
Scrie-ti parerea
X

Nu exista nici un produs vizualizat recent.

X

Nu exista nici un produs adaugat in lista de comparatie.