Comenzi telefonice: +40.755.631.576
Deschis astazi 10:00 - 18:00

OTTOCANALI 1204 + 16 * XENO 6

Powersoft + Audac
cod produs: 0231 +XENO 6
La comanda
21274.81 Lei
*pretul include TVA
Cumpara
+-

Descrierea Produsului

Un sistem compus din 16 boxe Audac XENO 6 (6'' - 80W) si un amplificator Powersoft Audio Ottocanali 1204 ( 8 * 150w @4 ohm). 

Solutia se preteaza pentr un spatiu cu o suprafata aproximativa de 250mp.

Flexibil si de maxima siguranta, Ottocanali 1204 dispune de o gama larga de optiuni de control al sistemului si monitorizare precum si  optiuni de modelare a sunetului, in total pana la 1280 W pentru 8 canale de amplificare pentru sistemul Lo-Z de voltaj constant , totul intr-o singura unitate rack:de sine statator sau impreuna cu modele Powersoft Duecanali.

Ottocanali 1204 furnizeaza o versatilitate si eficienta nemaintalnite, multumita setului de BatFormers®.Acestea sunt dezvoltate special, fiind niste transformatoare ce pot fi instalate cu usurinta in amplificator si care permit tuturor celor 8 canale, in iesiri de 70V/100V.

Alta versiune, Ottocanali 1204 DSP+ETH include functionalitate DSP pentru toate cele 8 canale, imperecheate prin conexiune Ethernet pentru control deplin si monitorizare prin Armonía Pro Audio Suite™ , fiind compatibil si cu alte amplificatoare Powersoft K,M,D, Q si seria Duecanali (interfata disponibila pentru MediaMatrixCrestronAMXcontrol,Q-SYS si sisteme de monitorizare).

Conform cu IEC 60849, și pe picior de egalitate cu seria Duecanali, Ottocanali 1204 DSP + ETH corespunde cerinteloresentiale pentru sisteme de sunet pentru situatii de urgentă.

Alimentare:

  •   Alimentare cu comutator universal pana la 400V cu PFC(Factor de corectie putere)
  •   Filtru de iesire cu retea de anulare unda
  •   Protectie Low Inrush pentru a reduce socurile de curent
  •  Cablu detasabil cu IEC C19/22.2 (16A pentru UE, 20 A pentru SUA)


Protectii:

Circuit complet protejat cu:

  •     Protectie curent: alimentarea se opreste atunci cand voltajul depaseste valorile  gamei de operare
  •  Protectie DC: protejeaza impotriva semnalului infrasonic la iesiri

 

  •   Protectii VHF: protejeaza difuzoarele impotriva frecventelor inalte care nu se pot auzi, non muzicale
  •     Protectie scurt-circuit : protejeaza amplificatorul de la scurt-circuit prin resetare automata
  •     Limitator termen lung:protejeaza difuzoarele impotriva semnalelor non audio
  •  Protectie termica: temperatura pana la 80 °C (176 °F)
  • Temperatura controlata continuu prin intermediul unui ventilator

General

  • Comutator frecvente fixe pentru acuratete mai mare a sunetului
  • Compact 1 RU pentru a reduce costurile rack si spatiul
  • Greutate mica - pentru montare usoara in rack si transport: 5-11 kg(11-24.3 lbs) on functie de nr de BatFormers
  • Conectori Phoenix standard:intrare analog si digitala, iesiri audio,surse auxiliare,alarme si GPIO
  • Intrari comutabile pe canal (principala si aux)

Configurare sistem difuzoare

  • Actionare directa, fie  impedanta redusa sau linii de 70V/100V HI-Z
  • Filtru high pass comutabil 35Hz/70Hz
  • Configuratie mixta cu posibilitatea cuplarii la sisteme Lo-Z/Hi-Z
  • Impedanta redusa pe perechea de canale

Alarme si GPIO

  • Scop general al interfetelor de alarma intrare/iesire:
    • Curent continuu periculos in semnalul de iesire
    • stress termic
  • Contact alarma configurabil NC/CO pe fiecare canal
  • Intrare AUX la distanta / comutator de alimentare principala
  • comutator ON / OFF
  • Conector PWS OUT oferind pana la 24VDC

Digital Signal Processing*

  • Analog Devices® ADAU 1702 DSP architectura
  • Convertor AD/DA : dual 24bit @ 48 kHz Tandem® architectura, interval dinamic 100 dB, pe fiecare canal
  • Egalizatoare independente de intrare/iesire pe fiecare canal ce furnizeaza PEQ,filtre IIR dar si filtre FIR
  • Intarziere pana la 16 s pt sincronizare
  • Active DampingControl™
  • Limitator Peak si RMS

Managementul controlului la distanta:

The XENO series is a loudspeaker range specifically designed for fixed audio installations in modern environments, offering two different sizes of contemporary and elegant designed products. What makes them so unique is their full range audio design, allowing them to be used without additional bass cabinet. The XENO 6 is the 6” version, featuring a 1” dome tweeter and a 6” Mid / Low frequency driver, ensuring a high-fidelity sound. This wooden cabinet is fitted with a slim and elegant front grill. This makes the loudspeaker suitable for different kinds of environments where the audio system has to create the right atmosphere both aesthetically and musically. This ranges from design interiors in residential applications to contemporary retail stores and restaurants where a clear background sound is desired. But the XENO 6 also shines in clubs and pubs where the sound goes up after the sun goes down. It delivers a powerful full range of sound with an RMS rating of 80 Watt, and a maximum of 160 Watt. The advanced Integrated protection circuit avoids tweeter damaging when overload occurs. The included mounting bracket makes it possible to mount the loudspeaker in both horizontal and vertical position, making it suitable for every application. The connections can be made on the rear side of the loudspeaker with an Euro Terminal block connector. Ships with 2mm safety cable with a PVC jacket. All Xeno series speakers are available in Black (/B) or White (/W).

General
Number of channels 8
 
Output power Single channel mode Distributed line* Bridge mode
Test Standard,EIAJ 1 kHz, 1% THD   4 Ω 8 Ω   70V 100V   8 Ω 16 Ω  

  150 W 80 W   125 W 130 W W 300W 150 W  
Max output voltage / current 37 Vpeak / 15 Apeak 115 V 165 V 76 V
 
AC Main Power
Power supply Universal, regulated switch mode with PFC
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V
230 V
Idle 13.9 W 0.26 A
14.6 W 0.34 A
Idle Energy save ON 13.9 W 0.26 A
14.6 W 0.34 A
1/8 of max output power @ 4 Ω 224 W 1.99 A
223 W 1.24 A
1/4 of max output power @ 4 Ω 423 W 3.7 A
417 W 2 A
 
Thermal
Max environmental operating temperature 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V
230 V
Idle 30 BTU/h 7.6 kcal/h
32 BTU/h 8.1 kcal/h
Idle Energy save ON 30 BTU/h 7.6 kcal/h
32 BTU/h 8.1 kcal/h
1/8 of max output power @ 4 Ω 252 BTU/h 63.5 kcal/h
249 BTU/h 62.7 kcal/h
1/4 of max output power @ 4 Ω 414 BTU/h 104.3 kcal/h
399 BTU/h 100.5 kcal/h
 
AUDIO
Gain 32 dB 41 dB 44 dB
Input sensitivity 0.63 V / -1.8 dBu 0.63 V / -1.8 dBu 0.63 V / -1.8 dBu
Max input level 7.7 V / 20 dBu 7.7 V / 20 dBu 7.7 V / 20 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω or (±2.5 dB) @ 32W, 70V lines / 65 W, 100V lines
S/N ratio > 92 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 61 dB @ 1kHz (4 Ω)
THD+N < 0.2% from 1 W to full power (typically <0.05%)
IMD < 0.2% from 1 W to full power (typically <0.05%)
Input impedance 10 kΩ balanced
Slew rate 12 V/μs @ 8Ω, input filter bypassed
Damping factor > 500 @ 2-200 Hz (Lo-Z)
 
DSP
DSP architecture Analog Devices ADAU® 1701 DSP
AD Converter Dual 24 bit 48 kHz with 100 dBA S/N, THD < 0.02% (20 Hz - 20 kHz)
DA Converter Dual 24 bit 48 kHz with 102 dBA S/N, THD < 0.02% (20 Hz - 20 kHz)
Internal precision Fixed point
Firmware Network upgradable firmware
Latency 0.644 ms fixed latency architecture
Crossover Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct
Delay up to 16 ms per output
Limiters Peak and RMS limiter
Damping control Active DampingControl™
 
Front panel
Indicators and Controllers 8 x LED bar - Signal level and over-temperature protection
Connectors
AC main 1 x IEC C14 connector - 15 A max (region-specific power cord provided)
Audio signal input 2 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Signal input – MAIN
2 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Signal input – AUX
Alarm 2 x 12 pin Phoenix MC 1.5/12-ST-3.81 - Alarm connector
Remote command 1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Remote line/aux switch and PWS out
1 x 4 pin Phoenix MC 1.5/4-ST-3.81 - Remote on/off switch and aux voltage
Network/data 1 x Rj45 socket - Ethernet + AESOP connection (DSP+AESOP version only)
 
Rear panel
Indicators and Controllers 1 x Power switch - 
 
Construction
Dimensions (L x H x W) 483 mm x 44.45 mm x 360 mm (19.0 in x 1.8 in x 14.2 in)
Weight 14 kg (30.9 lb)
Max. Power 160 Watt
RMS Power 80 Watt
MAX SPL 110 dB
Sensitivity (1W / 1m) 88 dB
Impedance 8 Ohm
Frequency Response (±3 dB) 65 Hz - 18 kHz
Dimensions (W x H x D) 210 x 345 x 220 m
Weight 5,6 Kg

Review-uri

Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.
Scrie-ti parerea
X

Nu exista nici un produs vizualizat recent.

X

Nu exista nici un produs adaugat in lista de comparatie.