Comenzi telefonice: +40.755.631.576
Deschis astazi 10:00 - 18:00

Modul amplificare Powersoft D-CELL504IS

Powersoft
cod produs: PF000222
In Stoc
2089.94 Lei
*pretul include TVA
Cumpara
+-

Descrierea Produsului

The D-Cell504 IS Series literally brings in the palm of your hand all the flexibility of the D-Cell504 family of amp modules, providing in a compact platform all you need to quickly develop your product and dramatically reduce time-to-market.

Available in both 2-channel version and in an incredibly compact 4-channel model with two amp units, with D-Cell504 IS it's easy to power a 2-way loudspeakers with up to 2x350W on 4Ω or 1x700W in bridge mode on 8Ω, or even 3-way systems with up to 700W on the low end.

Performances are simply amazing, thanks to the PFC power supply (allowing worldwide and error proof operation) and premium quality Class D output stage, also available with DSP on board.

Integrated on an elegant aluminum heatsink panel, the D-Cell504 IS offers an interface panel with input volume potentiometer, double XLR for mono input and link out or stereo input operation, four LED for Limit, Clip, Signal and Ready signaling.

Thanks to the presence on the interface panel of a preset selection pushbutton, four LED to show the preset in use and programming connector, both the end user and the manufacturer have easy access to the powerful functionalities of the DSP mounted on board, now also with remote control capabilities through Armonía Pro Audio Suite™.

Customizable Power Output: 350W + 350W @ 4Ω, 180W @ 8Ω + 350W @ 4Ω

  • Novel State of the Art Fixed Frequency PPM-PWM modulation: Unmatched audio performance from any perspective, intrinsic immunity to intermodulation artifacts in multi-channel applications
  • Very High efficiency/Low consumption
  • Comprehensive/smart protection features: thermal, overcurrent, high frequencies and non audio signals
  • Clip and Permanent signal limiter
  • Auxiliary output voltage (±12V regulated, 200mA)
  • Bypass line outputs for external active/passive filters
  • Mute command
  • Temperature controlled Fan output
  • Remote Control & Networking with optional DSP board
  • Fully integrate in Armonia, for complete monitoring and fine-tuning the whole system.
  • Power Factor Correction (PFC): for worldwide operation and error proof connection to mains voltage
  • Compact size and EMI/safety certification: for quick and easy product development
  • High quality audio: fixed frequency modulation design for predictable high end performance
  • Optional On Board DSP 2 In - 4 Out: 24 bit AD/DA conversion, 28X28 bit multiplier with 56 bit accumulator, full double precision processing. SigmaStudio® based full set of filtering, equalization, dynamic processing – 4 presets storable.
  • Auxiliary DSP processed outputs: for slaving other not DSP equipped units
  • Load Monitoring: for transducer health diagnostic and safety regulation compliance  
  •  

     

    General  
    Number of channels 2 / 4
       
    Output power Single channel mode   Bridge mode
      4 Ω 8 Ω 16 Ω       8 Ω    
        350 W 190 W 95 W       700W    
    Max output voltage / current 53 Vpeak /       106 Vpeak
       
    AC Main Power  
    Power supply Universal, regulated switch mode with PFC (Power Factor Correction)
    Nominal power requirement 100-240 V ±10%, 50-60 Hz
    Operating voltage 90 V - 264 V
       
    Thermal  
    Operating temperature range 0° - 45° C - 32° - 113° F
       
    AUDIO  
    Gain 32 dB (voltage gain x40) - DigiMod 1000 IS
    Input sensitivity 0.94V / 1.70dBu
    Max input level 15 dBu
    Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
    S/N ratio > 100 dB (20 Hz - 20 kHz, A weighted)
    Crosstalk separation > 70 dB @ 1kHz
    THD+N < 0,005 % from 0,1W to full power
    IMD SMPTE < 0,005 % from 0,1W to full power / DIM100 < 0,001% from 0,1W to full power
    Input impedance 10 kΩ balanced
    Slew rate 30 V/µs @ 8 Ω, input filter bypassed
    Damping factor > 1000 @ 100 Hz
       
    DSP  
    DSP architecture Analog Devices® ADAU 1702 DSP
    AD Converter 24 bit @ 48 kHz architecture
    DA Converter 24 bit @ 48 kHz architecture
    Internal precision 28 bit data path with 56 bit inner processing
    Firmware Update via ethernet port or RS485 or Powersoft programmer
    Latency 0.644ms fixed latency architecture
    Input equalizer 5 layers: parametric, hi/lo-shelving, hi/lo-pass, band-pass, band-stop, all-pass
    Output equalizer 10 full parametric per channel, IIR: peaking, hi/lo Shelving, hi/lo Pass Eq., Band pass, Band stop, All pass
    Crossover Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct
    Delay up to 10 ms per output
    Limiters Peak limiter, RMS limiter, frequency dependent RMS limiter
       
    Construction  
    Dimensions (L x H x W) 100 mm x 110 mm x 330 mm (3.9 in x 4.3 in x 13.0 in)
    Weight 1.15 kg (2.5 lb)

    Review-uri

    Fii primul care isi exprima parerea!
    Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.
    Scrie-ti parerea
    Modul amplificare Powersoft D-CELL504IS
    X

    Nu exista nici un produs vizualizat recent.

    X

    Nu exista nici un produs adaugat in lista de comparatie.