Comenzi telefonice: +40.755.631.576
Deschis astazi 10:00 - 18:00

Elation eNode 4

Elation
cod produs: 1321000068

Descrierea Produsului

The eNode4 is an Ethernet node that serves four DMX512 outlets, compatible with the Artnet protocols. All 4 outlets conform to DMX512-A and can be used as input or output. The two Ethernet links on the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The eNode4 embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater. All configuration are done through the on-board display and push dial. The eNode4 can be set on a flat surface or mounted to a truss structure using the quick lock omega bracket, which is included.

Connections: 
2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
4 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)
FEATURES
(4) Universal DMX Ports (can be set as Input or Output)
(2) RJ45 TCP/IP 10/100M Ethernet Connections
Rotary Menu Wheel / Function Selection Button
LCD Menu / Function Display
PowerCON Power In
Auto MDI/MDIX, DMX-512, and ArtNet Support
ArtNet - DMX Bilateral Signal Conversion
DMX Splitter Function (1Input / 3 Outputs)
LCD Display & LED Indicators
Broadcast Mode (One Device Transmits Same Signal to Other Connected Devices)
Backup Mode
 
CONTROL / CONNECTIONS
(4) 5pin DMX Ports
(2) RJ45 TCP/IP 10/100M Ethernet Connections
Rotary Menu Wheel / Function Selection Button
LCD Menu / Function Display
PowerCON Power In
 
SIZE / WEIGHT
Length: 10.0” (255mm)
Width: 6.8” (173mm)
Vertical Height: 1.7” (43mm)
Weight: 3.5 lbs. (1.6kg)
 
ELECTRICAL / THERMAL
AC 100-240V - 50/60Hz
5W Max Power Consumption
35.6°F (2°C) to 113°F (45°C)

Review-uri

Fii primul care isi exprima parerea!
Daca ai testat acest produs ajuta alti utilizatori sa afle cateva detalii despre el.
Scrie-ti parerea
X

Nu exista nici un produs vizualizat recent.

X

Nu exista nici un produs adaugat in lista de comparatie.