Descriere

Featuring the same compression driver as the VHD 2.0 but on a wide  angle 110° horizontal by 40° vertical horn, the VHD 1.0 Mid High / down-fill enclosure features a single 12"low mid and single 8" mid range speaker taken from the VHD 2.0. Designed to be powered as a slave from the VHD 2.0 cabinet or directly from the VHD 2000 amplifier, all equalization, set up and level are preset providing a plug and play solution for large scale touring and high quality installations. Alternatively as a stand alone box up to three VHD 1.0"s can be powered from a single VHD 2000 amplifier. Like the VHD 2.0, VHD 1.0 is available in left and right versions for downfill applications.

Aplicatii

Componente

Specificatii

System Acoustic Perfomance   
-3dB Response 100Hz - 22kHz
-10dB Response 85Hz - 30kHz
Full Range mode -3dB Response 65Hz - 22kHz
Max SPL Long-term 134dB (139dB two VHD 1.0's)
Max SPL Peak 137dB (142dB two VHD 1.0's)
Crossover Point 100Hz, 450Hz, 2.2kHz
Impedance Low 16Ω  Mid 12Ω  High 16Ω
Mid/ High Horn Coverage Horizontal/ Vertical 110° x 40°
 
Mid Range Section  
Acoustic Design Horn loaded
Woofer Size/ Voice Coil Diameter/ Design One 8" / 3.0" / Trans Coil
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Mid/ High Horn Coverage Horizontal/ Vertical 110° x 40°
Midrange Amplifier Requirement 300W from VHD 2000
 
Mid-Bass Section  
Acoustic Design Horn loaded
Woofer Size/ Voice Coil Diameter/ Design Two 12" / 3" / Inside Outside
Diaphragm Material Epoxy Reinforced Cellulose
Magnet Type Neodymium
Mid-bass Amplifier Requirement 600W from VHD 2000
 
Physical Dimensions  
Height 660mm (25.98")
Width 700mm (27.55")
Depth 495mm (19.48")
Weight 45kg (99lbs)
 
High Frequency Compression Driver  
Throat Exit Diameter/ Diaphragm Size 1.4" / 3.0"
Diaphragm Material Nitride Titanium
Magnet Type Neodymium
High Frequency Amplifier requirement 100W from VHD 2000
Rear H.F attenuation switch -3dB for high frequency only
 
Speaker Input /Output  
Speaker Input/ Output Input and output EP6