Cosul este gol

oferta speciala - mai 2012

Microfon SHURE KSM 32/CG

2.687 RON -10%

Microfon SHURE BETA 53

1.783 RON -10%

Microfon SHURE SM87A

Cod produs:
Producator: Shure

Disponibil: la comanda

The Shure SM87A microphone is a professional-quality, handheld condenser microphone for use in sound reinforcement, broadcasting, and studio recording installations. Its supercardioid polar pattern provides greater rejection of unwanted sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for miking single sources in a reverberant or noisy environment. An integral three-stage wind and pop filter protects against wind and breath noise. Its built-in shock mount reduces stand and handling noise.

Highly directional supercardioid pickup pattern
Controlled low-frequency roll-off
Very low RF and magnetic hum susceptibility
Minimally affected by varying load impedance
Built-in wind and pop filter
Transducer element shock mounted
Rugged construction for outstanding reliability
Field-usable over a wide range of temperature and humidity conditions
Accepts a wide variety of phantom power sources, including DIN 45 596 voltages of 11 and 52 Vdc

Cartridge Type

Condenser (electret bias)

Frequency Response

50 to 20,000 Hz

Polar Pattern

Supercardioid

Output Impedance

Rated at 150 ohms (100 ohms actual +/- 20%)

Recommended minimum load impedance: 800 ohms

Sensitivity (at 1,000 Hz)

Open Circuit Voltage: -52.5 dBV/Pa (2.4 mV)

(1 Pa = 94 dB SPL)

Clipping Level (at 1,000 Hz)

1000 ohm Load: -6 dBV (0.5 V)

Maximum SPL (at 1,000 Hz)

140.5 dB (0.25% THD, 1000 ohm load)

Self-Noise (equivalent sound pressure level; measured with true rms voltmeter)

24 dB typical, A-weighted

26 dB typical, weighted per DIN 45 405

Dynamic Range: 116.5 dB (maximum SPL to A-weighted noise level)
Signal-to-Noise Ratio: 70 dB at 94 dB SPL (IEC 651)*; *S/N ratio is difference between 94 dB SPL and product's equivalent self noise (SPL A-weighted)
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3.
Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3.; Current Drain: 1.0 to 1.2 mA
Connector: Three-pin (XLR) professional audio.
Case: Aluminum construction with steel grille and satin black finish
Dimensions: See User Guide
Net Weight: 200 grams (7 oz)